air conditioner system
bestwarranty shopcart order login
Brand : Goodman Gas Furnaces
hvac prices
Product Name : 5 Ton Goodman SEER 15 Gas Furnace DSXC180601 CAPF4961C6 GMS80805CN

Item# :
DSXC180601 CAPF4961C6 GMS80805CN
Reg Price :
$6,571.50
Your Price :
$4,381.00
Choose QTY :
 
heat pump splits

Description

The Goodman Brand DSXC18 18 Seer Air Conditioner
 uses the chlorine-free refrigerant R-410A and features energy efficiencies and operating sound levels that are among the best in the heating and cooling industry. The DSX18 contains the two-stage, high-efficiency Copeland scroll compressor, which provides improved temperature and humidity control. This unit is designed consumer who desires superb comfort and quiet operation.

Standard Features:

  • R-410A chlorine-free refrigerant
  • Two-Stage Copeland UltraTech scroll compressor
  • High-density foam compressor sound blanket
  • Copeland ComfortAlert diagnostics
  • Low-pressure switch
  • Fully charged for 15' of tubing length
  • Factory-installed filter dryer
  • Highly efficient condenser fan motor
  • Copper tube/enhanced aluminum fin coil
  • Sweat connection service valves with easy access to gauge ports
  • AHRI Certified; ETL Listed

Description

The Goodman CAPF4961C6 comes from an impressive line of indoor coils that are designed for split-system air conditioning and heat pump installations. This Goodman evaporator coil resists mold through a thermoplastic, low-water-retention drain. The application of this unit is as an upflow/downflow coil and works with R-22 or R-410A refrigerant.

This Goodman coil features a painted cabinet. The tonnage of this unit (the nominal capacity range at 13 SEER) is 4 to 5 tons. Keep in mind that the Flowrater tonnage used should accommodate the higher number between the air conditioner and heat pump. The overall dimensions of this coil are 21" W x 21" D x 30" H.

Features

  • Suitable for use with R410A and R22 refrigerants
  • Rust-proof, high-temperature, thermoplastic drain pans feature a low water-retention design
  • Available with check flowrater expansion device for heat pump or cooling-only applications
  • Rifled copper tubing and corrugated aluminum fin coils
  • Foil-faced insulation
  • High quality post-paint cabinet
  • Split-seam front for easy access

Description

The Goodman GMS80805CN is a multi-speed gas furnace. It uses an aluminized-steel, dual-diameter tubular heat exchanger. It has foil-faced insulation lining the heat exchanger compartment itself and the coil and furnace fit flush in most installation placements. The multi-speed direct drive blower motor of this unit works quietly to adjust to changing temperature demands.

This Goodman gas furnace is a single-stage, multi-speed, multi-position heater. It uses a reliable Norton hot surface mini-igniter to maintain a comfortable temperature in the home. This Goodman gas furnace has a heating capacity of 80,000 BTU.

This heater comes from the GMS8 line of Goodman gas furnaces. This collection of Goodman gas furnaces has up to 80% AFUE (annual fuel utilization efficiency) rating. Many standard furnaces feature 60% AFUE, which means that this system can contribute to significant energy savings.

This multi-position Goodman gas heater offers many installation options. It can be installed in upflow or horizontal left or right positions. This model features a furnace control board with self-diagnostics and low-voltage terminal block.






Features

  • Operates as a natural gas furnace out of the box, and can be easily converted to a propane furnace with optional propane conversion kit (see Accessories tab).
  • Corrosion-resistant, aluminized-steel tubular furnace heat exchanger
  • Furnace is designed for multi-position installation - Goodman GMS8: upflow, horizontal right or left; Goodman GDS8: dedicated downflow
  • Energy-saving, reliable hot surface ignition system with Goodman furnace patented adaptive learning algorithm to maximize igniter life
  • Aluminized steel inshot gas furnace burners
  • Energy-saving PSC, multi-speed, direct drive blower motor
  • Quiet, corrosion-resistant induced draft furnace blower assembly
  • Integrated Goodman furnace control with diagnostics
  • Low voltage terminal blocks
  • Multiple flame roll-out switches, blower door safety switch, outlet air-limit switch and pressure switch for proof of combustion air
  • 40VA transformer for heating and air conditioning control service
  • Combination redundant gas valve and regulator
  • A rotating combustion air blower (Goodman GMS8) that provides the option of venting the furnace through the top, right-hand side or left-hand side
  • Completely assembled, factory run-tested furnace for heating or combination heating/cooling application
  • Furnace has heavy-gauge, reinforced, fully insulated steel cabinet with durable baked-enamel finish
  • Attractive architectural gray paint finish
  • Heater's foil-face insulation lines the heat exchanger compartment
  • Coil and furnace fit flush for easy installation
  • Convenient left or right connection for gas and electric service
  • Bottom or side air inlet (Goodman GMS8)
  • Removable, solid-bottom block off This furnace does not comply with California NOx Standards (the Goodman furnace models that end in "X" do comply). This furnace is not for sale to the state of California due to emissions laws

Description

A specially formulated super-hydrophobic (water repelling) product in a convenient aerosol package for field service. The non-conductive formula has numerous applications in the management of water on non-food, non-potable water surfaces for the HVAC/R trade; surfaces that are not exposed to ongoing abrasion (hand and foot traffic).

  • Slows ice formation on refrigeration coils/cold plates

  • Provides added corrosion resistance to coils

  • Improves corrosion resistance to system components. Examples include circuit boards, filter-driers, flow control valves, equipment covering, etc.

  • Provides added corrosion protection of solder connections on low voltage circuit boards

  • Self-cleaning properties reduce rate of grime on outdoor coils

  • Reduces rate of bacterial growth on non-food, non-potable water surfaces

  • Improves water dispersion in condensate pans

  • Many other applications!



Specification

Cooling Capacity 57000 BTU
 Cooling Capacity 5 Tons
 SEER 18 SEER
 Refrigerant R-410A
 Maximum Overcurrent Protection (Breaker) 60 Amps
 Compressor Type Scroll UltraTech™
 Low Pressure Safety Switch Yes
 Liquid Line Connection Size 3/8 Inches
 Suction Line Connection Size 7/8 Inches
 TXV Required Yes
 Noise Level 74 Decibels
 Pad Size 36x36 Inches
 Shipping Weight 330 lbs
 Width 35 1/2 Inches
 Depth 35 1/2 Inches
 Height 38 1/4 Inches
 Voltage 208 / 230 Volts
 Frequency 60 Hz
 Voltage Phase 1
 Compressor Warranty Lifetime With Online Registration
 Parts Warranty 10 Years


Specification

Configuration Downflow / Upflow
 Cooling Capacity 60000 BTU
 Cooling Capacity 5 Tons
 Refrigerant R-22 / R-410A
 Liquid Line Connection Size 3/8 Inches
 Suction Line Connection Size 7/8 Inches
 Orifice Size 0.093 inches
 Coil Width 21 inches
 Coil Height 30 inches
 Coil Depth 21 inches
 Plenum Opening Width 20 inches
 Shipping Weight 73 lbs
Specification


Configuration Horizontal / Upflow
 Blower Cooling Capacity 3 / 3.5 / 4 / 5 Tons
 Maximum Input BTU 80000 BTU
 Maximum Heating Output BTU 64000 BTU
 Maximum CFM 1960 @ 0.5
 Efficiency (% AFUE) 80 %
 Blower Type Multi-Speed
 Burner Stages Single
 Maximum Overcurrent Protection (Breaker) 15 Amps
 Fuel Type LP Capable (Kit Required) / Natural Gas
 ENERGY STAR® Qualified No
 Vent Connection 4 Inches
 Supply Air Opening Size 19.5 x 19.5 Inches
 Flue Pipe Diameter 4
 Product Weight 163 lbs
 Shipping Weight 163 lbs
 Meets CSA Standards Yes
 Meets Canadian OEE Standards No
 California Approved No
 Width 21 Inches
 Depth 28 Inches
 Height 33 3/8 Inches
 Voltage 120 Volts
 Frequency 60 Hz
 Voltage Phase 1
 Heat Exchanger Warranty Lifetime
 Unit Replacement Warranty 10 Years
 Parts Warranty 10 Years

Directions

This product must be used in accordance to the following directions by HVACR professionals only.

  1. Disconnect all power to the equipment before use. Do not spray near sparks, heat or open flame. Discontinue the use of power tools during use. Do not smoke while applying product.
  2. Shake well before use. Use outdoors or in a well-ventilated area. Keep area ventilated until fumes are gone. Avoid breathing of fumes during application.
  3. Ensure surface is clean and mostly to fully dry before applying. After a coil cleaning, the surface needs to be blown dry with an inert gas to remove excess moisture from the surface before applying Nu-Shield.
  4. From a distance of 6-12 inches, spray a light coat on the surface, but no more beyond it being visibly wet. In other words, ‘Wet It and Forget It’. Contents in the canister will cover approximately 100 square feet. Depending on ambient conditions, allow a minimum of 20 minutes for Nu-Shield to dry on surface. Ensure surface appears visually dry and fumes are gone from the area before turning on power to equipment.

Note: Product needs to be applied after each coil cleaning. For best results, especially in corrosive environments, the product should be reapplied annually.







10 Year All Parts Warranty

The Goodman CAPF4961C6 qualifies for a 10-Year Parts Limited Warranty.The Goodman GMS80805CN qualifies for a Lifetime Heat Exchanger Limited Warranty and a 10 Year Parts Limited Warranty.

SHIPPING DETAILS

Mostly All Of Our Products Are Shipped Same Or Next Day

Your product will be mostly shipped using Freight Company such as SAIA, ESTES, Old Dominion, FEDEX or UPS and will be delivered in 1-5 business days depending upon your geographical location from our warehouses. We ship products from warehouses in NY, NJ, FL, CA,AZ, TX And MO. Mostly if you are close to our warehouses, you should receive the Product in 1-3 business days. We will email you your tracking number soon as its shipped out or you can log into your account on our website by using your email address and password you created at the time of placing order to check all the shipment and product details.
Please remember we only ship to 48 states within United States. Due to expensive shipment fee we do not ship to Hawaii & Alaska. We do not ship to Canada, Puerto Rico, Jamaica and other countries due to custom issues.

Though above shipment and delivery process is what we normally practice, under unforseen circumstances they cannot be guaranteed at all times. But we do our best and mostly succeed to ship the product either same or the next day.

Overnight Shipping Details (if required)

We can ship overnight or by Second Day Air. But beacuse these are air conditioners and the package weighs more than 90 pounds usually, shipping overnight can result in the package being mishandled and delivered damaged. Plus it cost anywhere from $180-$850 more than regular shipping depending upon your location from our warehouse. Feel free to email us with such enquiries.

Delivery Acceptance, Returns, Exchanges and Cancellation Policy.

We truly appreciate your business and for the past 2 decades being in this business we have continued to do our best to earn customer trust with each transaction. We want you to be happy with your purchase.

100% Satisfaction is guaranteed with all your purchases. In case any of the RARE complications occur, we will handle them upto your best interest and satisfaction.

Delivery Acceptance Terms:
If you receive a package that seems damaged or dented, please open the package in front of the driver and after inspection if you see the product has a severe damage you can refuse the package and call us immediately. We will then arrange a new shipment (Free Replacement) ASAP.

Please note: If the box looks visibly damaged, the product inside may still be in perfect condition as they are well padded for shipping purposes.

PLEASE DO NOT SIGN OR REFUSE THE PACKAGE WITHOUT INSPECTING THE CONDITION OF THE PRODUCT INSIDE. Please take pictures if needed, accept or refuse shipment based upon the condition of the product in the box, not based upon the condition of the box. Please remember if you signed off on a delivery document, insurance cannot be filed if cosmetic damage is found at a later date, as it is considered to have happened after delivery at jobsite.

If you need to get in touch with KINGERSONS, please call KINGERSONS customer service number at 1-386-951-1722 OR email us with your query. AS PER OUR WEBSITE, BELOW IS OUR EXCHANGE/RETURN POLICY FOR YOUR REFERENCE.


DEFECTIVE EXCHANGE
If unit (any product) is defective, depending upon the brand you buy, it will be taken care of by manufacturer warranty. Usually they will send out the replacement part within 24 hours, if replacing part is not a solution, they would probably replace the whole unit if the product was found defective. Replacement will only be made with the same model, if customer decides to upgrade or downgrade to a different model, we'll treat it as a return and a new order.

* All returns should be in original packaging and in brand new condition. Installed products are not considered brand new and cannot be returned.

* All damaged returns and replacements must be requested within 24 hours after the receipt of the product. *

Before shipping the product back, you should request an RA# (Return Authorization number), without an RA# your package will not be accepted, will be refused and sent back by the warehouse.


RETURNS
For all returns, customer is responsible to ship product back to our warehouse at their own expense; restocking fee of 19% will apply regardless if defective and original shipping fee (from $69 to $189 depending upon the product you purchased) will not be refunded as it is paid to the trucking company's and they are non-refundable.

CANCELLATIONS
If you placed the order and you wanted to cancel the order BEFORE IT IS SHIPPED, we will gladly cancel your order and $15.99 cancellation fee will be charged and 3% credit card processing charges will not be refunded. Please make sure that you call us within few hours after the order is placed. We ship the items out same or next business day. We cannot process cancellations after the product is shipped out. It will be considered as a return instead once the product is shipped and you will need to pay the return charges. If the delivery of the shipment is refused above return policy will apply. Once the item is shipped, the shipping company will not refund us the shipping fee back and will charge us for shipping both ways, this will not be refunded if cancelled after the product is shipped and 19% restocking fee will apply.

 

THANK YOU ONCE AGAIN FOR SHOPPING WITH US!
ask a question

Product Name: 5 Ton Goodman SEER 15 Gas Furnace DSXC180601 CAPF4961C6 GMS80805CN
Your Phone Number:
Your Email:
What is Your message about
Type Your Name and Message here.
Verification Code: Captcha

 

 
searchproducts
 
 
 
Advanced Search
shopbycategory
  heatpumpsystem   Midea Ductless Split AC
ductless-mini-split
  heatpumpsystem   TOSOT Ductless Split AC
ductless-mini-split
  heatpumpsystem   MR.COOL
ductless-mini-split
  heatpumpsystem   Carrier Ductless Split AC
ductless-mini-split
  heatpumpsystem   OLMO Ductless Mini Split AC
ductless-mini-split
  heatpumpsystem   Cooper&Hunter Split AC
ductless-mini-split
  heatpumpsystem   CHIGO Ductless Split AC
ductless-mini-split
  heatpumpsystem   Mitsubishi Ductless Mini Split k
ductless-mini-split
  heatpumpsystem   YMGI Ductless Mini Split
ductless-mini-split
  heatpumpsystem   LG Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Aircon Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Fujitsu Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Klimaire Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Daikin Ductless Mini Split
ductless-mini-split
  heatpumpsystem   GREE Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Senville Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Panasonic Split Systems
ductless-mini-split
  heatpumpsystem   Central AC/Heat Pump
ductless-mini-split
  heatpumpsystem   TANKLESS WATER HEATERS
ductless-mini-split
  heatpumpsystem   Sanyo Ductless Mini Split
ductless-mini-split
  heatpumpsystem   Friedrich Ductless Mini Split
ductless-mini-split
  heatpumpsystem   ComfortStar
ductless-mini-split
  heatpumpsystem   Wall/Window Ac's
ductless-mini-split
  heatpumpsystem   Package Terminal AC Store
ductless-mini-split
  heatpumpsystem   Water Heating System
ductless-mini-split
  heatpumpsystem   Wall Mount Package Units
ductless-mini-split
  heatpumpsystem   Water Source Heat Pump
ductless-mini-split
  heatpumpsystem   Ecotemp AC Heat Pump
ductless-mini-split
  heatpumpsystem   Product Accessories
ductless-mini-split
  heatpumpsystem   Commercial Portable AC
ductless-mini-split
  heatpumpsystem   Generators
ductless-mini-split
  heatpumpsystem   Air Coolers
ductless-mini-split
  heatpumpsystem   Wine Coolers
ductless-mini-split
  heatpumpsystem   Misc Air Conditioners
ductless-mini-split
  heatpumpsystem   Perfumes/Colognes
ductless-mini-split
  heatpumpsystem   Dehumidifiers
ductless-mini-split
  heatpumpsystem   Discontinued Products
ductless-mini-split
BTU CALCULATOR
House Air Conditioners
Air Conditioner Contractors
Daikin Air Conditioner
HVAC Contractors

Warehouse Locations:
New York, New Jersey, California, Florida, Missouri, Georgia, Texas, Arizona and Canada.

All 100% Authentic Brand New Products
In God We Trust

Copyright 2004 ADVANCE INFOTECH INC. Website Designed, Owned and Maintained by Bhatia International

>